#Ultimaker cura guide how to#

The printing temperature is mainly dependent on what filament you are using.

We will then look at the calibration of the most important settings so that you can optimize the default values given here for your system. In this part of the article, you will learn in detail what the individual settings do and which settings are best for the different filaments. These are the best settings for TPU with the Anycubic Kobra:Д«est Cura Settings for the Anycubic Kobra It is even more important to calibrate these settings, as each TPU filament can behave slightly differently depending on the manufacturer. However, due to the flexible nature of the filament, the print settings are important so that the filament does not get tangled. Thanks to the direct drive extruder, the Anycubic Kobra can process TPU very well. First layer: 0% cooling, 140% extrusion width, 100% layer height.These are the best settings for ABS with the Anycubic Kobra: If you have problems with the print bed adhesion, Magigoo can help. In this article, you will find a detailed test. To keep the ambient temperature homogeneous, the Creality 3D printer enclosure is best suited for the Anycubic Kobra. Not only do you need higher temperatures, a constant ambient temperature is also important so that the filament does not warp during cooling. First layer: 0% cooling, 100% extrusion width, 100% layer heightДЄBS is much more demanding than PLA.These are the best settings for PLA with the Anycubic Kobra: However, I advise you to always calibrate the settings. The default PLA settings for the Anycubic Kobra are listed below. It can be processed with any FDM 3D printer and forgives many a mistake. PLA is one of the easiest filaments to use for 3D printing. In the next lines, I will show you the best settings for PLA, ABS and TPU. To get perfect results you need to adjust and calibrate the print settings to the filament you are using. However, these profiles are not yet matched to the individual filaments and the printer and will deliver suboptimal results. The accuracies range from 0.06 mm to 0.6 mm. Extruder End G-code = Leave at default valuesД¬ura then automatically creates multiple profiles for a wide range of accuracies.Extruder Start G-code = Leave at default values.After that, the machine settings for the newly created 3D printer will open.

Name the new 3D printer вЂњAnycubic KobraвЂќ in the menu on the right.

Scroll down, open the Custom menu and select вЂњCustom FFF printerвЂќ.

After that a popup menu opens where you can add new printers.

At the top of the Cura interface, click вЂњSettingsвЂќ and then вЂњPrinterвЂќ and вЂњAdd PrinterвЂ¦вЂќ.

To create a new profile for the Anycubic Kobra, follow these steps: You just need to pay attention to the machine parameters and adjust the print settings to the filament you are using.ДЇirst, letвЂ™s take a look at the machine parameters and then at the individual filaments and their print settings. It is not difficult to create a profile for a new 3D printer in Cura.

#Ultimaker cura guide how to#

How to Create a Profile for the Anycubic Kobra in Cura

4 The Anycubic Kobra is Perfect for Beginners.

3.1 How to Calibrate the Printing Temperature.

2 Best Cura Settings for the Anycubic Kobra.

1 How to Create a Profile for the Anycubic Kobra in Cura.